[App_rpt-users] NanoPi
JJC
cummingsj at gmail.com
Thu Jul 26 13:08:12 UTC 2018
This is because OSS is not supported and marked as broken in current Linux distributions. You can either use a kernel that has it compiled in or you can do what I did and use:
ALSA
PulseAudio
osspd (emulates oss through pulse)
I’ll write up some basic instructions for how mine is working... but the net of it it is that without /dev/dsp1 your asl can’t send or receive audio via your sound card (URI)
Maybe I’m talking out of turn, I did not read the entire thread back.
Sent from the iRoad
> On Jul 26, 2018, at 07:52, Bob Good <Bob at Fot.com.au> wrote:
>
> Hi Steve
>
> Thanks that worked…… However now all seems to load and registers OK but SimpleUSB wont loa/run ?
>
> return email: Bob at Fot.com.au
>
> NODE=47324
> REGPASS=47324:xxxxxx at register.allstarlink.org ; This must be changed to your node number, password
>
>
>
> Call sign: VK6ZGN
> Interface type: SimpleUSB/usb_47324 ; SimpleUSB
> Echolink Callsign: INVALID
> Echolink node: 000000 ASL node used:
>
> Ping test to 8.8.8.8
> PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
> 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=77.5 ms
> 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=70.6 ms
> 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=84.1 ms
> 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=84.4 ms
>
> --- 8.8.8.8 ping statistics ---
> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
> rtt min/avg/max/mdev = 70.664/79.212/84.453/5.656 ms
>
> Ping test to register.allstarlink.org
> PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50 time=209 ms
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50 time=208 ms
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50 time=208 ms
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50 time=208 ms
>
> --- register.allstarlink.org ping statistics ---
> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
> rtt min/avg/max/mdev = 208.471/208.709/209.006/0.220 ms
>
> Ouput of ifconfig
> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 192.168.168.39 netmask 255.255.255.0 broadcast 192.168.168.255
> inet6 fe80::4f:49ff:fe38:5803 prefixlen 64 scopeid 0x20<link>
> ether 02:4f:49:38:58:03 txqueuelen 1000 (Ethernet)
> RX packets 1641 bytes 149786 (146.2 KiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 1781 bytes 554581 (541.5 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
> device interrupt 33
>
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> inet 127.0.0.1 netmask 255.0.0.0
> inet6 ::1 prefixlen 128 scopeid 0x10<host>
> loop txqueuelen 1000 (Local Loopback)
> RX packets 16 bytes 1312 (1.2 KiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 16 bytes 1312 (1.2 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
>
> Output of lsmod grep dahdi
> dahdi 200704 28
>
> IAX2 registry
> Host dnsmgr Username Perceived Refresh State
> 67.215.233.178:4569 Y 47324 58.178.114.94:64301 60 Registered
>
> Asterisk version:
> Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l running Linux on 2018-03-07 14:53:41 UTC
>
> Current date and time: 2018-07-26.04:32
>
> updatenodelist service running?
> root 682 0.0 0.4 4428 2384 ? Ss 04:29 0:00 /bin/bash /usr/local/bin/rc.updatenodelist &
> root 1650 0.0 0.1 3764 560 pts/2 S+ 04:35 0:00 grep updatenodelist
>
> /tmp/rpt_extnodes-temp file
> -rw-r--r-- 1 root root 0 Jul 26 04:30 /tmp/rpt_extnodes-temp
>
> /var/lib/asterisk/rpt_extnodes file
> -rwx------ 1 root root 140551 Jul 26 04:26 /var/lib/asterisk/rpt_extnodes
>
> ####### Begin warnings from messages file
> [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb_47324.conf for device usb_47324 .
> [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Unable to re-open DSP device 1 (usb_47324): No such file or directory
> [Jul 26 04:26:42] WARNING[986] chan_simpleusb.c: Unable to re-open DSP device 1 (usb_47324): No such file or directory
> And so on forever !!
>
> ####### Begin warnings from messages.1 file
>
> 73
> Bob
> VK6ZGN
>
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Steve Zingman
> Sent: Wednesday, 25 July 2018 17:58
> To: Users of Asterisk app_rpt
> Subject: Re: [App_rpt-users] NanoPi
>
> Bob,
> It looks like DKMS did not rebuild DAHDI properly.
>
> Please do as root:
> dpkg-reconfigure asl-dahdi-linux-dkms
> reboot
>
> Should now be fixed. Check DAHDI is running by:
> lsmod | grep dahdi
>
> 73, Steve N4IRS
>
> On 07/25/2018 04:38 AM, Bob Good wrote:
>
> Hi Guys
>
> I have tried loading ASL_1.01-20180228-armhf-nanopi image onto a NanoPi
>
> Seems to load fine I run the updates etc then the Menu all seems OK but AllStar does not seem to run ?
>
> return email: bob at Fot.com.au
>
> NODE=47324
> REGPASS=47324:xxxxx at register.allstarlink.org ; This must be changed to your node number, password
>
>
>
> Anyone got any ideas ??
>
> 73
> VK6ZGN
> Bob Bob at Fot.com.au
> Western Australia Mob. 61 (0) 418 902 194
>
> The contents of this e-mail (including any attachments) may be
> confidential and privileged. Any unauthorised use of this document
> or it's contents is prohibited. If you have received this e-mail in
> error, please notify us immediately and erase this document
> E&OE
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180726/4f639ffa/attachment.html>
More information about the App_rpt-users
mailing list