[App_rpt-users] usbradio.conf rxdemod

[Mike]

does the volume change in app_rpt when you adjust the volume control on 
the radio ?

...mike/kb8jnm


On 6/1/2018 5:36 PM, Bob Pyke wrote:
> Not sure exactly. The MASTR II has a TS-32, and the audio comes from “audio filter output” on the TS-32, which is driven by the MASTR II “VOL SQ HI” and from there is where it gets messy, as there appear to be errors in the schematic which indicates it is wired to the PTT, in one part of the schematic, and “SPkR H” in another part. I think they have some pi numbers miss labeled in the schematic.
>
> Thanks,
> Bob
> K6ECM
> 73
>
>
>> On Jun 1, 2018, at 2:21 PM, Mike <mm at midnighteng.com> wrote:
>>
>>
>> Are you using discriminator audio, line audio or speaker audio ?
>>
>>
>> ...mike/kb8jnm
>>
>>
>>> On 6/1/2018 5:19 PM, Bob Pyke wrote:
>>> When I set usbradio.conf
>>> rxdemod=flat ; the audio out of the repeater sounds muffled compared to the audio while listening to the repeater input with a monitoring radio. When
>>> rxdemod=speaker ; the audio out of the repeater sounds tinny compared to the audio input to the repeater.
>>>
>>> Is there a way to “select” something in between in software?
>>>
>>> Thanks,
>>> Bob
>>> K6ECM
>>> 73
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.