[App_rpt-users] Multiple Cop commands

[Mike]

Yes, each pin needs a assigned command for on and again for off.

You could execute a pattern inside a macro.

...mike/kb8jnm


On 6/13/2018 7:19 PM, John Rudolph- N2YP wrote:
> When using cop 61 or 62 to change gpio states can you change more than 
> one pin with the same command or do you have to break it out as one 
> pin at a time?
> Example:
> cop,61,GPIO1=0,GPIO4=1,GPIO5=1
>
> If so is this the right format and if not what would it be?
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180613/9012818c/attachment.html>