[App_rpt-users] Multiple Cop commands

[Bob Pyke]

It seems to me it should look more like:

[function]

991=cop,61,gpio1=0
992=cop,61,gpio4=1
993=cop,61,gpio5=0

[macro]

30=*991 *992 *993 #

See Mike’s page, themidnightengineer.com

Thanks,
Bob
k6ecm
73
Sent from my iPhone

> On Jun 13, 2018, at 4:19 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
> 
> When using cop 61 or 62 to change gpio states can you change more than one pin with the same command or do you have to break it out as one pin at a time?
> Example: 
> cop,61,GPIO1=0,GPIO4=1,GPIO5=1 
> 
> If so is this the right format and if not what would it be?
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.