[App_rpt-users] Multiple Cop commands

[Mike]

Bob, I thought I was anonymous LOL

Those old pages... I may have to go back and look... but afraid to since 
it gets hacked more than I wish to say.

I use it more to record the latest hack techniques.

anyway,

this is from my actual command list with reference. Make sure you use 
long/longer numbers to avoid commend conflicts in the future and not 
loose future number possibilities. You can make sequence changes via 
grouped macro.

8910=cop,61,pp1=0    ;pport pin 1 off  --First 3 pins used for DH RBI-1 
-data-clock-reset
8911=cop,61,pp1=1    ;pport pin 1 on   --
8920=cop,61,pp2=0    ;pport pin 2 off  --
8921=cop,61,pp2=1    ;pport pin 2 on   --
8930=cop,61,pp3=0    ;pport pin 3 off  --
8931=cop,61,pp3=1    ;pport pin 3 on  --
8940=cop,61,pp4=0    ;pport pin 4 off
8941=cop,61,pp4=1    ;pport pin 4 on
8950=cop,61,pp5=0    ;pport pin 5 off
8951=cop,61,pp5=1    ;pport pin 5 on
8960=cop,61,pp6=0    ;pport pin 6 off
8961=cop,61,pp6=1    ;pport pin 6 on
8970=cop,61,pp7=0    ;pport pin 7 off
8971=cop,61,pp7=1    ;pport pin 7 on
8980=cop,61,pp8=0    ;pport pin 8 off
8981=cop,61,pp8=1    ;pport pin 8 on
;XXX=cop,61,PP4=1    ; EX: Parallel Port Pin 4 1=(high-true) 0=(low/off)
;xxx=cop,62 as above -quite telemetry-


...mike/kb8jnm


On 6/13/2018 8:45 PM, Bob Pyke wrote:
> It seems to me it should look more like:
>
> [function]
>
> 991=cop,61,gpio1=0
> 992=cop,61,gpio4=1
> 993=cop,61,gpio5=0
>
> [macro]
>
> 30=*991 *992 *993 #
>
> See Mike’s page, themidnightengineer.com
>
> Thanks,
> Bob
> k6ecm
> 73
> Sent from my iPhone
>
>> On Jun 13, 2018, at 4:19 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
>>
>> When using cop 61 or 62 to change gpio states can you change more than one pin with the same command or do you have to break it out as one pin at a time?
>> Example:
>> cop,61,GPIO1=0,GPIO4=1,GPIO5=1
>>
>> If so is this the right format and if not what would it be?
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.