[App_rpt-users] Radio-tune-menu not functioning

[Steve Zingman]

Stretch is the Debian "codename" for Debian version 9. All of the 
AllStarLink Asterisk images are built on Debian 9. In the case of the 
Raspberry Pi, that is Raspbian Stretch. In the case of the x86/AMD that 
is Debian Stretch (9)

73, Steve N4IRS

On 3/28/2018 8:33 AM, ARS W5OMR wrote:
> I suppose I was confused by the term 'sudo privleges' thinking that 
> the user didn't have to precede every command because they had sudo 
> rights.
> That's something about Debian I never understood. Stretch is Debian 
> based, no?
>
>
> On Wed, Mar 28, 2018, 07:24 Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     Geoff,
>     You have it correct. If you try to run radio-tune menu as user
>     repeater, you do get the error. Running it with sudo
>     radio-tune-menu works. The user repeater does have sudo
>     privileges, which allow you to run a command with elevated rights.
>     If you do not want to have to type sudo, you can either run sudo
>     -s or set the root password (which is NOT set by default) and then
>     use su.
>
>     73, Steve N4IRS
>
>
>     On 3/28/2018 8:00 AM, ARS W5OMR wrote:
>>     In my case, it was a permissions issue.
>>     User 'repeater' is supposed to have sudo (sudo -l) rights, but
>>     every time I tried to enter a command on ASL 1.01, it had to be
>>     proceeded with 'sudo'.
>>
>>     Try 'sudo radio-tune-menu' and see what happens.
>>
>>     73
>>     W5OMR
>>
>>     On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John at n2yp.com
>>     <mailto:John at n2yp.com>> wrote:
>>
>>         I'm at a loss. I upgraded my Dial system to the new All Star
>>         Link 1.0 and am have a few issues. When I try and run
>>         radio-tune-menu I get
>>
>>         root at N2YP_Rogers_Knob:~# radio-tune-menu
>>         Error parsing device parameters
>>
>>         I've read through past messages and checked that
>>         chan_usbradio was the active one in modules and that simple
>>         USB was set for no load. Also as of right now my nodes load
>>         with the URI's and sort of function as they are. Even when no
>>         radios are hooked up they lockup in "transmit" mode. I've
>>         tried rebooting the system and any other suggestions I could
>>         find with no luck. I've tried with both new and old conf
>>         files with no success.
>>         John Rudolph
>>         Amateur Radio Op N2YP
>>         Unadilla,NY
>>         _______________________________________________
>>         App_rpt-users mailing list
>>         App_rpt-users at lists.allstarlink.org
>>         <mailto:App_rpt-users at lists.allstarlink.org>
>>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>         To unsubscribe from this list please visit
>>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>         and scroll down to the bottom of the page. Enter your email
>>         address and press the "Unsubscribe or edit options button"
>>         You do not need a password to unsubscribe, you can do it via
>>         email confirmation. If you have trouble unsubscribing, please
>>         send a message to the list detailing the problem. 
>>
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem. 
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180328/1e245de5/attachment.html>