[App_rpt-users] Radio-tune-menu not functioning

[ARS W5OMR]

I suppose I was confused by the term 'sudo privleges' thinking that the
user didn't have to precede every command because they had sudo rights.
That's something about Debian I never understood. Stretch is Debian based,
no?


On Wed, Mar 28, 2018, 07:24 Steve Zingman <szingman at msgstor.com> wrote:

> Geoff,
> You have it correct. If you try to run radio-tune menu as user repeater,
> you do get the error. Running it with sudo radio-tune-menu works. The user
> repeater does have sudo privileges, which allow you to run a command with
> elevated rights.
> If you do not want to have to type sudo, you can either run sudo -s or set
> the root password (which is NOT set by default) and then use su.
>
> 73, Steve N4IRS
>
>
> On 3/28/2018 8:00 AM, ARS W5OMR wrote:
>
> In my case, it was a permissions issue.
> User 'repeater' is supposed to have sudo (sudo -l) rights, but every time
> I tried to enter a command on ASL 1.01, it had to be proceeded with 'sudo'.
>
> Try 'sudo radio-tune-menu' and see what happens.
>
> 73
> W5OMR
>
> On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John at n2yp.com> wrote:
>
>> I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and
>> am have a few issues. When I try and run radio-tune-menu I get
>>
>> root at N2YP_Rogers_Knob:~# radio-tune-menu
>> Error parsing device parameters
>>
>> I've read through past messages and checked that chan_usbradio was the
>> active one in modules and that simple USB was set for no load. Also as of
>> right now my nodes load with the URI's and sort of function as they are.
>> Even when no radios are hooked up they lockup in "transmit" mode. I've
>> tried rebooting the system and any other suggestions I could find with no
>> luck. I've tried with both new and old conf files with no success.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180328/3c5b9710/attachment.html>