[App_rpt-users] New ASL v 1.0.1 not connecting to any HUB or Node

[Mike]

Check DNS servers in your router then server.

Then verify your entire network config in your server.

Reboot it all after any changes, test again.

But your problem 'may' be DNS from AT&T - LTE.

In your case, you may need to revert to google dns, but I would resist 
that if possible.

Without port forwarding, you will likely only have outbound connects.

You may have some success using a dynamicDNS service from your router or 
server to the web if you can config that.


...mike/kb8jnm


On 5/13/2018 10:48 AM, Alberto Enrique Puig wrote:
> Can someone on the group lent me a hand.
>
> I installed the new ASL v 1.0.1 on a RasPi 3 and on a x86 machine. 
> Everything installed fine but on both nodes I cannot get then to 
> connect to any particular external node or HUB.
>
> I did run the System Diagnotics Menu from A to I and everything is 
> been reported to be working without any problem.
>
> My network is a AT&T Home Base 4G LTE wireless router. No port 
> forwarding allowed.
>
> BTW.. a Debian DIAL version on RasPi connect and works ok on this network.
>
> Do not know if I an missing something else to check.
>
> Regards,
>
> 73' Alberto KP4AP
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180513/4e8d0ef9/attachment.html>