[App_rpt-users] Node Type

[mwbesemer at cox.net]

"links to the repeater only via the repeater input/output"... so no.

Mike
WM4B

On Wed, May 16, 2018 at 1:40 PM, Mike wrote:

> Can you change the freq of operation of the radio attached by command 
> 'within/though" this node # ?
>
> ...is the answer to your question. location does not matter.
>
>
> ...mike/kb8jnm
>
>
> On 5/16/2018 12:54 PM, mwbesemer at cox.net wrote:
>> If a node is established at a location different from that of the 
>> repeater and links to the repeater only via the repeater 
>> input/output, would it be considered a non-frequency agile 
>> remote-base?
>>
>> Mike
>> WM4B
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.