[App_rpt-users] AWS hosted ASL install?

[Russell Thomas]

So, I scraped and restarted a fresh image with AWS. This time, I
installed Ubuntu 16.04.
ASL appeared to install fine.
I edited several of the config files for the node (which is setup as
hub no radio)

i went to start asterisk and got this and I need some help:
~$ sudo astup.sh
Starting asterisk...
systemctl start asterisk.service
A dependency job for asterisk.service failed. See 'journalctl -xe' for details.

then i tried the following:
$ sudo asterisk -rvvv

AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd
Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty'
for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)


Asterisk directory:

$ dir
amd.conf         extensions.conf   pi.conf         simpleusb.conf
asterisk.conf    features.conf     pi-dsp.conf     simpleusb_tune_usb_1999.conf
beagle.conf      gps.conf          pi-nodsp.conf   sip.conf
chan_dahdi.conf  iax.conf          pi_tune_1.conf  tlb.conf
custom           indications.conf  pi_tune_2.conf  usbradio.conf
dnsmgr.conf      logger.conf       res_snmp.conf   usbradio_tune_usb_1999.conf
dundi.conf       manager.conf      rpt.conf        voter.conf
echolink.conf    modules.conf      savenode.conf


73,
Russell Thomas, KV4S
NWS Liaison and Station Trustee
http://alert-alabama.org

Cell: 205.202.1701
DMR: 3101393
D-Star: KV4S
AllStar: 47923
EchoLink: KV4S-L (1003254)
HamShackHotline: 4225
Web: http://KV4S.com


On Mon, May 14, 2018 at 4:27 PM, Tom Hayward <tom at tomh.us> wrote:
> On Mon, May 14, 2018 at 2:03 PM Russell Thomas <russell at kv4s.com> wrote:
>>
>> thank you.
>>
>> it doesn't appear everything updates?
>
>
> We're getting outside of the scope of this mailing list now, but make sure
> your EC2 instance has a public IP address, your VPC has an internet gateway,
> and your routing table has a default route to that internet gateway. For
> updates, you could also get away with a NAT gateway, and default route in
> your table to that NAT gateway, but for Allstar you'll want the public IP
> address.
>
> Tom KD7LXL
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.