[App_rpt-users] AWS hosted ASL install?
Chuck Henderson
rpt2 at chuck.midlandsnetworking.com
Thu May 17 16:42:54 UTC 2018
did you issue the command:
journalctl -xe
The answer may be in it's output.
On Thu, May 17, 2018 at 11:29 AM, Russell Thomas <russell at kv4s.com> wrote:
> So, I scraped and restarted a fresh image with AWS. This time, I
> installed Ubuntu 16.04.
> ASL appeared to install fine.
> I edited several of the config files for the node (which is setup as
> hub no radio)
>
> i went to start asterisk and got this and I need some help:
> ~$ sudo astup.sh
> Starting asterisk...
> systemctl start asterisk.service
> A dependency job for asterisk.service failed. See 'journalctl -xe' for
> details.
>
> then i tried the following:
> $ sudo asterisk -rvvv
>
> AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd
> Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and
> others.
> Created by Mark Spencer <markster at digium.com>
> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty'
> for details.
> This is free software, with components licensed under the GNU General
> Public
> License version 2 and other licenses; you are welcome to redistribute it
> under
> certain conditions. Type 'core show license' for details.
> =========================================================================
> Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
>
>
> Asterisk directory:
>
> $ dir
> amd.conf extensions.conf pi.conf simpleusb.conf
> asterisk.conf features.conf pi-dsp.conf
> simpleusb_tune_usb_1999.conf
> beagle.conf gps.conf pi-nodsp.conf sip.conf
> chan_dahdi.conf iax.conf pi_tune_1.conf tlb.conf
> custom indications.conf pi_tune_2.conf usbradio.conf
> dnsmgr.conf logger.conf res_snmp.conf
> usbradio_tune_usb_1999.conf
> dundi.conf manager.conf rpt.conf voter.conf
> echolink.conf modules.conf savenode.conf
>
>
> 73,
> Russell Thomas, KV4S
> NWS Liaison and Station Trustee
> http://alert-alabama.org
>
> Cell: 205.202.1701
> DMR: 3101393
> D-Star: KV4S
> AllStar: 47923
> EchoLink: KV4S-L (1003254)
> HamShackHotline: 4225
> Web: http://KV4S.com
>
>
> On Mon, May 14, 2018 at 4:27 PM, Tom Hayward <tom at tomh.us> wrote:
> > On Mon, May 14, 2018 at 2:03 PM Russell Thomas <russell at kv4s.com> wrote:
> >>
> >> thank you.
> >>
> >> it doesn't appear everything updates?
> >
> >
> > We're getting outside of the scope of this mailing list now, but make
> sure
> > your EC2 instance has a public IP address, your VPC has an internet
> gateway,
> > and your routing table has a default route to that internet gateway. For
> > updates, you could also get away with a NAT gateway, and default route in
> > your table to that NAT gateway, but for Allstar you'll want the public IP
> > address.
> >
> > Tom KD7LXL
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> > scroll down to the bottom of the page. Enter your email address and press
> > the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180517/76d8ec8c/attachment.html>
More information about the App_rpt-users
mailing list