[App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst

Tue May 22 02:13:24 UTC 2018

Mike,
   Just wanted to make sure, it wasn’t something simple…Did you check to make sure you have your firewall opened up on port 4569 to accept incoming traffic via UDP?  Hope that helps.  73 de K4SQI!

Steve, K4SQI

From: Mike
Sent: Monday, May 21, 2018 9:52 PM
To: app_rpt-users at lists.allstarlink.org
Subject: [App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst

-------- Forwarded Message -------- 
Subject: 
Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst
Date: 
Mon, 21 May 2018 21:49:17 -0400
From: 
Mike <mm at midnighteng.com>
To: 
Skyler F <electricity440 at gmail.com>
TNX,
I seem to be having issues with the host and port blockage. Again.
At least it looks that way from the surface.
Outbound works fine.
So for all wanting to take part, 
Since I don't want it to be a total bomb,
Perhaps connect to 29999 and will try that instance.
Thanks,
...mike/kb8jnm

On 5/21/2018 9:32 PM, Skyler F wrote:

Unable to connect from my node 45499

On Mon, May 21, 2018 at 7:24 PM Mike <mm at midnighteng.com> wrote:
Hmmm.....
Had a issue on that system from time to time...
perhaps a reboot will flush it out.
TNX
...mike/kb8jnm

On 5/21/2018 9:19 PM, Mark Johnston wrote:
I guess your not showing up in here for some reason 
root at KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep 29993
root at KC7DMF:/home/repeater# 

Tried to manually set it using port 4569, but failed to connect, guess I'm doing something wrong.

73

Mark KC7DMF

**** North West Hub Allstar Node 2295 ****

"Got Root?"

How many software engineers does it take to change a light bulb?
None. It's a hardware problem.

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."

On Mon, May 21, 2018 at 11:41 AM, Mike <mm at midnighteng.com> wrote:
Wondering if you would mind participating in a load test of the 29993 node

You may look at the allmon stats as we progress @ http://29993.link

that is installed on a vultr 512mb minimal instance.

I will post the cpu/mem/bandwidth stats for all to see, when available.

Along with how many were connected etc.

The goal here is to find the reasonable limits of a vps min install.

Connect up between 9 and 10pm esdst which I believe is 1am utc may 21 tonight (MONDAY )

If we don't swamp it to a crash, perhaps a little round table discussion on VPS deployments.

Thank You !

...mike/kb8jnm

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-- 
Skyler Fennell 
amsatnet.info
KDØWHB
electricity440 at gmail.com

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180521/ac2f335f/attachment.html>