[App_rpt-users] Fwd: Re: Help me with a load test 29993 1:00utc/9:esdst

Tue May 22 06:31:51 UTC 2018

Maybe you should try linode or digital ocean each is like $5/mo

On Mon, May 21, 2018, 19:35 Mike <mm at midnighteng.com> wrote:

> Yes... I thought it was simple at first but quickly relized it was not.
>
> I shut the firewall down.
>
> I 'believe' it to be on vultrs end. I had a issue in the past about them
> blocking my ports.
>
> They just blanketed all my instances for one that did get out of my
> control.
>
> And that kept me from getting email notices of things that were going
> wrong on any/all the instances.
>
> Making cpu usage go up, incrementally over time as things going out were
> retying constantly backups between the servers and system messages to
> boot....
>
> It too was a test system. But I have a problem with the fact they shut
> down the ports on all the instances without a message to me.
>
> And that was from issue on just 1 instance that was a strictly asterisk
> server.
>
> Well, will put a ticket in after I verify that is indeed the issue.
>
> But I can't get though on any port but 22.
>
> But perhaps I do not fully understand this firewall set-up in debian.
>
> Been using csf normally as of late.
>
> Anyway, thank you for the efforts. Hate to have a botched test like this.
>
> Makes folks less likely to try next time. Thank You !
>
> 73, mike/kb8jnm
>
>
>
> On 5/21/2018 10:13 PM, Steven Blackford wrote:
>
> Mike,
>
>    Just wanted to make sure, it wasn’t something simple…Did you check to
> make sure you have your firewall opened up on port 4569 to accept incoming
> traffic via UDP?  Hope that helps.  73 de K4SQI!
>
>
>
> Steve, K4SQI
>
>
>
>
>
> *From: *Mike <mm at midnighteng.com>
> *Sent: *Monday, May 21, 2018 9:52 PM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *[App_rpt-users] Fwd: Re: Help me with a load test 29993
> 1:00utc/9:esdst
>
>
>
>
>
>
>
> -------- Forwarded Message --------
>
> *Subject: *
>
> Re: [App_rpt-users] Help me with a load test 29993 1:00utc /9:esdst
>
> *Date: *
>
> Mon, 21 May 2018 21:49:17 -0400
>
> *From: *
>
> Mike <mm at midnighteng.com> <mm at midnighteng.com>
>
> *To: *
>
> Skyler F <electricity440 at gmail.com> <electricity440 at gmail.com>
>
>
>
> TNX,
>
> I seem to be having issues with the host and port blockage. Again.
>
> At least it looks that way from the surface.
>
> Outbound works fine.
>
> So for all wanting to take part,
>
> Since I don't want it to be a total bomb,
>
> Perhaps connect to 29999 and will try that instance.
>
> Thanks,
>
> ...mike/kb8jnm
>
>
>
> On 5/21/2018 9:32 PM, Skyler F wrote:
>
>
>
> Unable to connect from my node 45499
>
>
>
> On Mon, May 21, 2018 at 7:24 PM Mike <mm at midnighteng.com> wrote:
>
> Hmmm.....
>
> Had a issue on that system from time to time...
>
> perhaps a reboot will flush it out.
>
> TNX
>
> ...mike/kb8jnm
>
>
>
>
>
> On 5/21/2018 9:19 PM, Mark Johnston wrote:
>
> I guess your not showing up in here for some reason
>
> *root at KC7DMF:/home/repeater# cat /var/lib/asterisk/rpt_extnodes |grep
> 29993*
>
> *root at KC7DMF:/home/repeater#*
>
>
>
> Tried to manually set it using port 4569, but failed to connect, guess I'm
> doing something wrong.
>
>
>
> 73
>
>
>
> Mark KC7DMF
>
>
> **** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub>
> ****
>
>
>
> "Got Root?"
>
>
>
> How many software engineers does it take to change a light bulb?
>
> *None. It's a hardware problem.*
>
>
>
> The best way to accelerate a computer running Windows is at 9.81 m/s².
>
>
>
> *"I get paid to support Windows, I use Linux to get work done."*
>
>
>
> On Mon, May 21, 2018 at 11:41 AM, Mike <mm at midnighteng.com> wrote:
>
> Wondering if you would mind participating in a load test of the 29993 node
>
> You may look at the allmon stats as we progress @ http://29993.link
>
> that is installed on a vultr 512mb minimal instance.
>
> I will post the cpu/mem/bandwidth stats for all to see, when available.
>
> Along with how many were connected etc.
>
> The goal here is to find the reasonable limits of a vps min install.
>
> Connect up between 9 and 10pm esdst which I believe is 1am utc may 21
> tonight (MONDAY )
>
> If we don't swamp it to a crash, perhaps a little round table discussion
> on VPS deployments.
>
> Thank You !
>
> ...mike/kb8jnm
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at lists.allstarlink.org
>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> --
>
> Skyler Fennell
>
> amsatnet.info
>
> KDØWHB
>
> electricity440 at gmail.com
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at lists.allstarlink.org
>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180521/3038b644/attachment.html>