[App_rpt-users] Echolink....
Mike
mm at midnighteng.com
Sat May 26 18:36:28 UTC 2018
ASL does not 'try' to do anything but emulate a echolink port in
attachment to a ASL node..
Can it (tcp 5200) forward though the NAT ? ASL will not do that for
you. It will take it if it can get there.
It should be in the norm with your udp 5198 5199 forwards.
And there can't be some other device with echolink on the same side of
the nat.
So switching your phone to use cell data is a must unless you have more
than 1 ip at home./site
It might appear that it can be done, but I suggest not correctly for both.
...mike/kb8jnm
On 5/26/2018 12:53 PM, Steve Siesel wrote:
>
> Doesn’t ASL create the tcp connection for Echolink therefore allowing
> traffic to reach ASL? This was working fine until recently…… The only
> question is did something change with my ISP ( Fronteir Fios)…
>
> *From:*App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
> Behalf Of *Mike
> *Sent:* Saturday, May 26, 2018 12:43 PM
> *To:* app_rpt-users at lists.allstarlink.org
> *Subject:* Re: [App_rpt-users] Echolink....
>
> Whel,
>
> there is more to know about your install and the failed attempts.
> Where they are and what the failed devices are and what network they
> might be on.
>
> But I will point out if your attempt is from your phone or any device
> behind your nat,
>
> and your NODE is also behind the same nat,
>
> it will be refused.
>
> Only one echolink connect per ip address (echolink rules).
>
> But, don't forget to add tcp port 5200 to your nat forward list.
>
> But I will say, in cellphones, after you switch to/from a proxy, it
> seems to be buggy if you do not first get a update to the nodes list.
>
> So do that right after switching type direct/proxy/relay and before
> you try to connect to anyone.
>
> Perhaps is a start... but I don't know enough to your particulars to
> say more.
>
> ...mike/kb8jnm
>
> On 5/26/2018 12:30 PM, Steve Siesel wrote:
>
> All…..
>
> I have been having some issues with Echolink lately….First, I do
> believe my UDP ports 5198 and 5199 are being blocked. As I
> understand it…This only concerns operations via Smartphone. My
> Echolink link node K4KSA-L is listed as being on in the Echolink
> status page.
>
> However, when using the desktop client, I do see the
> following….However the desktop app does not make a connection and
> times out….
>
> Any thoughts?
>
> Steve
>
> -- 9 variables
>
> -- Channel echolink/el0-1 answering
>
> -- Name changed from Steve to Steve Siesel
>
> -- Received OK from Echolink server server2.echolink.org
>
> -- Received OK from Echolink server server1.echolink.org
>
> -- Directory pgm done downloading(partial,compressed), 459 records
>
> -- <DAHDI/pseudo-2138142179> Playing 'rpt/node' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/3' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/9' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/5' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/0' (language 'en')
>
> -- Name changed from Steve Siesel to Steve
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/0' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/7' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/7' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'rpt/connected' (language
> 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/2' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'rpt/node' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/4' (language 'en')
>
> -- Name changed from Steve to Steve Siesel
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/6' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/0' (language 'en')
>
> -- Name changed from Steve Siesel to Steve
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/3' (language 'en')
>
> -- <DAHDI/pseudo-2138142179> Playing 'digits/1' (language 'en')
>
> Node Variable dump for node 46031:
>
> RPT_TXKEYED=0
>
> RPT_ETXKEYED=1
>
> RPT_NUMLINKS=2
>
> RPT_LINKS=2,T1999,T3950077
>
> RPT_NUMALINKS=2
>
> RPT_ALINKS=2,1999TU,3950077TU
>
> RPT_AUTOPATCHUP=0
>
> RPT_RXKEYED=0
>
> TRANSFERCAPABILITY=SPEECH
>
> -- 9 variables
>
> Node Variable dump for node 46031:
>
> RPT_ETXKEYED=0
>
> RPT_TXKEYED=0
>
> RPT_NUMLINKS=2
>
> RPT_LINKS=2,T1999,T3950077
>
> RPT_NUMALINKS=2
>
> RPT_ALINKS=2,1999TU,3950077TU
>
> RPT_AUTOPATCHUP=0
>
> RPT_RXKEYED=0
>
> TRANSFERCAPABILITY=SPEECH
>
> -- 9 variables
>
> -- Hungup 'DAHDI/pseudo-2138142179'
>
> -- Name changed from Steve to Steve Siesel
>
> -- Name changed from Steve Siesel to Steve
>
> -- Name changed from Steve to Steve Siesel
>
> [May 26 12:25:38] WARNING[2694]: chan_iax2.c:10127
> iax2_do_register: REGISTER-LOG: Sending registration request for
> '46031'
>
> [May 26 12:25:38] WARNING[2693]: chan_iax2.c:7690
> registry_rerequest: REGISTER-LOG: registry rereqquest
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at lists.allstarlink.org
> <mailto:App_rpt-users at lists.allstarlink.org>
>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180526/84b7f49e/attachment.html>
More information about the App_rpt-users
mailing list