[App_rpt-users] Allstar node Scheduler Help

[Mike]

Run asterisk in the foreground with some verbosity ( asterisk -r -vvv) 
from putty or console and watch the screen for live events to see what 
is being called.

...mike/kb8jnm

On 11/9/2018 2:22 PM, Steve Thompson wrote:
> I’ve recently created a new Allstar node, and I’m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there’s a CW message telling me it’s a timeout. Then the node unkeys.
>
> Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out.
>
> I’ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf.  In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they’d not be running .. unless there’s something somewhere else triggering this behavior.
>
> Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly?
>
> I have an extensive IT background but not much familiarity with Linux OS, so go easy on me.
>
> Steve N7TX
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.