[App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub

[Brett Friermood]

Jim,

Might just be me but I'm having hard time understanding your setup. Any
chance you could provide a drawing or more detailed explanation of what
you're trying to do?

On Fri, Nov 23, 2018 at 1:42 PM Jim Aspinwall No1PC <no1pc at yahoo.com> wrote:

> I thought I was going to be ingenious and replace a few RLC multi-port
> controllers that each have one of the link ports tied to an AllStar node
> that runs in non-duplex, and the node connects to another AllStar hub
> (running in duplex) that is used as the 'link' to feed other repeaters in
> similar configuration.
>
> Simply connect the repeater radio to the AllStar interface, re-configure
> the node to duplex=2 - tah-dah - repeater!!
>
> Then, connect the repeater node to the hub so it can be linked to the
> other sites.  Connects as before, not unexpected. Great.
>
> What I did not account for is that the hub is running in duplex, so
> whatever the repeater sends to it comes back, delayed of course.  Sounds
> like an undesired configuration...
>
> However that doesn't seem to account for the fact in the prior
> configuration the duplex hub traffic never came back into the half-duplex
> node and echo'd.
>
> Is this a hang-time thing?   Am I missing something?  Expected behavior -
> don't try this at home?
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181123/dd0f0bb6/attachment.html>