[App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub

[Kevin Babich]

Jim, 

Try mode 3

Kevin J. Babich

219.406.9707 Mobile
 
***Mobile EMail***

Please excuse any typos and brevity. 

> On Nov 23, 2018, at 4:34 PM, Brett Friermood <brett.friermood at gmail.com> wrote:
> 
> Jim,
> 
> Might just be me but I'm having hard time understanding your setup. Any chance you could provide a drawing or more detailed explanation of what you're trying to do?
> 
>> On Fri, Nov 23, 2018 at 1:42 PM Jim Aspinwall No1PC <no1pc at yahoo.com> wrote:
>> I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration.
>> 
>> Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!!
>> 
>> Then, connect the repeater node to the hub so it can be linked to the other sites.  Connects as before, not unexpected. Great.
>> 
>> What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course.  Sounds like an undesired configuration...
>> 
>> However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd.    
>> 
>> Is this a hang-time thing?   Am I missing something?  Expected behavior - don't try this at home?
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181123/a2448feb/attachment.html>