[App_rpt-users] DTMF Decode Logic Output

[Monty]

Thanks for the suggestions.

I should clarify, I'm trying to use a in-cabinet repeat function of the
repeater (duplex=3) and to gate the audio when DTMF is detected.  Hoping to
use some sort of output from app_rpt to gate the audio instead of building
an external decoder.

Monty


On Sat, Nov 24, 2018 at 5:14 PM Bryan Fields <Bryan at bryanfields.net> wrote:

> On 11/23/18 6:57 PM, Monty wrote:
> > Anyone try to get a logic signal for when DTMF is detected from app_rpt?
>
> You can setup a command to run an external program or toggle gpio for any
> command you want.  Typically user defined macro's start with 5, but any
> number
> can be used so long as it's unique left to right.
>
>
>
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181125/1c326269/attachment.html>