[App_rpt-users] Allmon2 one instance to control multiple nodes

[Tim Sawyer]

Manager.conf allows localhost access but not remote by default. You have to
open it up but be sure to create a access list so that only your Allmon IP
can access VM.

On Thu, Nov 29, 2018 at 1:33 PM Russell Thomas <russell at kv4s.com> wrote:

> I'm probably missing something simple.
> I'm trying to just use one dashboard to monitor/control multiple nodes.
> Example:
> Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604
> Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604
>
> The nodes are on 2 different virtual servers.
> the secondary node's allmon can connect to the asterisk manager but the
> Main Allmon2 can't connect to the asterisk manger.
>
> Thoughts?
>
> 73,
> Russell Thomas, KV4S
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>


-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181129/3b85dfb8/attachment.html>