[App_rpt-users] Allmon2 one instance to control multiple nodes

[Russell Thomas]

thanks for the responses.

looks like i had the 0.0.0.0 in the wrong node.


On Thu, Nov 29, 2018 at 4:23 PM Mike <mm at midnighteng.com> wrote:

> Sorry , I did not notice at first these were both virtual but is all the
> same except for that router.
>
> But I wanted to add a few checks...
>
> allow manager port through your firewall ?
>
> set bind address  to this until you have it working
>
> bindaddr = 0.0.0.0
>
> Some other...
>
> enabled =
> yes
> webenabled =
> yes
> port = 5038
>
> If all else fails, move the file (copy) it to the one that does not and
> check own/permissions and test.
>
> Should tell you something.
>
> Perhaps it is a type error in your ini.php - ip/pass/port
>
> One of those itchy things that drives ya nuts ! LOL
>
> ...mike/kb8jnm
>
>
> On 11/29/2018 4:33 PM, Russell Thomas wrote:
>
> I'm probably missing something simple.
> I'm trying to just use one dashboard to monitor/control multiple nodes.
> Example:
> Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604
> Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604
>
> The nodes are on 2 different virtual servers.
> the secondary node's allmon can connect to the asterisk manager but the
> Main Allmon2 can't connect to the asterisk manger.
>
> Thoughts?
>
> 73,
> Russell Thomas, KV4S
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181129/2c6145fa/attachment.html>