[App_rpt-users] Allison speech messages / telemetry volume

[Mike]

...LOL...
Adjusting your audio to  make others readable, to me, is a very bad 
move. But I understand being a scouting event, you do what you can.
But if poor audio stations are not forced to fix their error, they won't.

...mike/kb8jnm

On 10/21/2018 4:14 PM, David McGough wrote:
> 
> Ed,
> 
> I just participated in the scouting JOTA event as well. Yes, the audio
> levels were all over the board, from clipping on every syllable to quieter
> than a mouse.  I think many/most of these stations where coming in via
> echolink, not natively via AllStar, etc.
> 
> Unfortunately, there isn't any easy fix for this. The linkmongain setting
> won't fix this, it is only for monitor mode (connecting with *2).
> 
> Telemetry ducking features are not implemented in the stock code release,
> as far as I know.
> 
> 73, David KB4FXC
> 
> On Sun, 21 Oct 2018, Edbathgate wrote:
> 
>> I was doing a scouting event, and experienced a number of the tx-ing
> stations with low audio, so I was cranking my volume and straining to
> hear the other stations, when a blasting disconnect message comes through.
>>
>> I found settings of how to block the connect/disconnect messages.
>>
>> There used to be 'ducking' settings in the Xipar distribution of allstar.
>> Telemnomdb=-10, Telemduckdb =. -15.  Do these still exist?
>>
>> I just found linkmongain variable.  Mine was still at zero.   I may jack that up to compensate for low hub audio.
>>
>> Anybody have suggestions to adjust the rx audio/hub audio/telemetry radios without severely blasting other users when I am connected into a hub?
>>
>> Ed N3SDO
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>