[App_rpt-users] Remote Base Questions

Sun Sep 2 04:36:10 UTC 2018

Is the remote PL'd
Some set-ups just pass PL, some generate/regenerate only when their cos 
is active.
So, if true, you might not hear the tail.
Can you try some other repeater ? or TX simplex on that freq with a HT 
for a test.

yes, I am still guessing...   LOL...
But i do understand better.
Except, Are you listening to this only through iaxrpt ?
Is iaxrpt connected directly to the remote base node or a normal full 
duplex node that is then connected to the remote base node ?

Send me a copy of your simpleusb/radiousb for the remote

...mike/kb8jnm

On 9/2/2018 12:17 AM, Rachel Olivero wrote:
> Mike,
> 
> I just saw this. SO I'll try and explain it better. I can jump on tomorrow if it'll be easier to talk out.
> 
> If I set the TM-D700 and an HT to a simplex frequency, I have no problem. I can transmit from iaxRpt and it keys the radio, sends my  voice, and I hear it  on the HT. I can reply on the HT and I hear the transmission in the headset connected to iaxRpt.
> 
> The trouble comes in when I set the TM-D700 to a repeater frequency. Normally, transmitting with an HT, one would hear the courtesy tone and hang time tail of the repeater. Neither of which I hear if I key a repeater when no COS signal  is present. However, if someone else initiates a transmission and I key up, respond,  and unkey, I instantly hear the repeater's audio coming from the D700. The best I can figure is that app_rpt is not detecting, or perhaps able to detect, COS immediately after PTT  release and it won't detect the COS signal unless it is lost and regained.
> 
> Let me know if that makes any more sense.
> 
> Thanks,
> Rachel
> 
> On Sat, Sep 1, 2018, at 21:14, Mike wrote:
>> I'm a bit sorry, since I can't tell which audio you are speaking of in
>> your statement. Makes it confusing. Could mean different things.
>>
>> There are circumstances that iaxrpt does not get returned audio as it is
>> a direct iax connection. But I can't determine from what you have said
>> exactly the circumstance, so ???
>>
>> You might connect to 29285 for a quick chat.
>> It's listening to DMR so you can talk over and call me.
>>
>> ...mike/kb8jnm
>>
>>
>> On 9/1/2018 9:46 PM, Rachel Olivero wrote:
>>> Mike,
>>>
>>> Thanks. I can check the COS logic. If it were inverted though, would I be receiving anything? I definitely get signal as long as the carrier is active before I transmit.
>>>
>>> I'll check permissions too.
>>>
>>> On Sat, Sep 1, 2018, at 20:42, Mike wrote:
>>>> While I can't say for sure,
>>>> it sounds like you have the logic inverted on your cos of the remote
>>>> base. If I am reading you right.
>>>>
>>>> The archive directory must exist. look for type errors both in your
>>>> definition in rpt.conf and the actual directory would be the first thing
>>>> in your checks.
>>>> archivedir=/var/www/html/somewhere/archive
>>>> It will only create a director <NODE#> to put the data in if it finds
>>>> the defined path to do it.
>>>> Also check ownership and permissions of the directory.
>>>>
>>>> Hope that gets you somewhere.
>>>>
>>>> ...mike/kb8jnm
>>>>
>>>> On 9/1/2018 9:12 PM, Rachel Olivero wrote:
>>>>> Good evening all:
>>>>>
>>>>> I presently have my TM-D700 connected to a Raspberry Pi with a URI and
>>>>> configured as a remote base. I'm using iaxRpt to control/use it.
>>>>> I'm noticing that if there is received audio and I transmit, everything
>>>>> works fine. When I unkey, I get the repeater audio immediately back over
>>>>> iaxRpt. However, if I transmit to a repeater that has had no carrier
>>>>> previously, I don't hear any returned audio. I've stood next to the
>>>>> radio and verified that I am keying the repeater. Tonight, a station
>>>>> responded and I got no audio until the carrier dropped and a new signal
>>>>> was detected. I'm not sure if this is a D700 issue, a URI issue, or an
>>>>> app_rpt issue. I'm open to any suggestions.
>>>>> One other question, I defined an archivedir in rpt.conf, but I don't see
>>>>> audio files in the directory. I see the promised text file, but no
>>>>> audio. Did I miss a step?
>>>>> Thanks,
>>>>> Rachel AD9O
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>> scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message
>>>> to the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and
>> press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message
>> to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 