[App_rpt-users] rpi root passwd

Pete Fierro overthetop52 at yahoo.com
Mon Sep 3 18:24:30 UTC 2018


You also need to do this to get into your winscp if you are using it.This is after you have enabled root
 nano /etc/ssh/sshd_config
Scroll down to ....
Permit root login yes
  Don't forget to uncomment out the # before the word "Permit"
PeteKD2ARB

Sent from Yahoo Mail on Android 
 
  On Mon, Sep 3, 2018 at 13:19, Bob Pyke<k6ecm1 at gmail.com> wrote:   You have to set one; “sudo” into root, then generate a new root password.

Thanks,
Bob
K6ECM

Sent from iPad


> On Sep 3, 2018, at 9:58 AM, REDBUTTON_CTRL <jrorke at cogeco.ca> wrote:
> 
> Hi All, trying to set up a new RPI node. Using latest rpi Dial release. But need the default root password. Doesn't seem to be listed on the Allstar wiki.
> the one for Repeater is listed but not root.
> 
> Anyone point me in the right direction?
> 
> Cant proceed with configuring my node until I have rot password.
> Used to be debian but I guess it was changed since the last release.
> 
> Thanks,
> 
> Jon RQ
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180903/95d67554/attachment.html>


More information about the App_rpt-users mailing list