[App_rpt-users] CM119 USB interface

[Mark DuMoulin]

Kevin,Brian;

I have been trying to set up use of radiousb instead of simpleusb. I see here Brian is doing that with the issues he is having.
I can't get nearly that far.
I am running hamvoip rc19 on some and recently downloaded stretch.
In both cases I set the usbradio module to load however I cannot get the driver to work and keep getting asterisk failures.
Additionally the menus set up by the programmer show only simpleusb-radio-tune not radio-tune-menu.
Is there another image or procedure I need to run to get this started?

Tnx,
Mark
WB2ERS

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Kevin Custer
Sent: Monday, December 24, 2018 2:57 PM
To: Users of Asterisk app_rpt; Brian G
Subject: Re: [App_rpt-users] CM119 USB interface

On 12/24/2018 12:21 AM, Brian G wrote:
> Ok, I'm thick sometimes :) I get what you're saying now, makes sense. 
> Thank you for the clarification. The Motorola is working as you 
> described, the other rigs not so much.
>
> So the gist of it is, there's no way to use DSP carrier detect without 
> using discriminator audio? It's CTCSS or VOX only in that case?

Correct -

BUT, discriminator audio should be available from that M120 radio. You just have to hook it up and possibly program it correctly.

Kevin
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.