[App_rpt-users] CM119 USB interface

[Mike]

Mark,

Can you show me the line in your rpt.conf where you are loading the channel.

ie    rxchannel = Radio/usb_29285

And your usbradio.conf file text


...mike/kb8jnm

What

On 1/1/2019 9:19 AM, Mark DuMoulin wrote:
> Kevin,Brian;
>
> I have been trying to set up use of radiousb instead of simpleusb. I see here Brian is doing that with the issues he is having.
> I can't get nearly that far.
> I am running hamvoip rc19 on some and recently downloaded stretch.
> In both cases I set the usbradio module to load however I cannot get the driver to work and keep getting asterisk failures.
> Additionally the menus set up by the programmer show only simpleusb-radio-tune not radio-tune-menu.
> Is there another image or procedure I need to run to get this started?
>
> Tnx,
> Mark
> WB2ERS
>
> -----Original Message-----
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Kevin Custer
> Sent: Monday, December 24, 2018 2:57 PM
> To: Users of Asterisk app_rpt; Brian G
> Subject: Re: [App_rpt-users] CM119 USB interface
>
> On 12/24/2018 12:21 AM, Brian G wrote:
>> Ok, I'm thick sometimes :) I get what you're saying now, makes sense.
>> Thank you for the clarification. The Motorola is working as you
>> described, the other rigs not so much.
>>
>> So the gist of it is, there's no way to use DSP carrier detect without
>> using discriminator audio? It's CTCSS or VOX only in that case?
> Correct -
>
> BUT, discriminator audio should be available from that M120 radio. You just have to hook it up and possibly program it correctly.
>
> Kevin
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.