[App_rpt-users] RP3 w/ URI and RC210- no audio

[Tim Sawyer]

Be sure you have set duplex=1 with the asl-menu or edit rpt.conf. Also the
119b chips need the level turned up almost all the way.

On Sun, Jan 20, 2019 at 7:36 AM Jim Hertel <n6kmr at frontiernet.net> wrote:

> Down loaded & installed the Pi3 allstarlink asterick (node 47379), have
> the Uri-B with factory cables, and cables to the RC210. I think I have
> it right. Port forwarding, UDP 4569 is pointing to the unit(repeater).
>
> RC210 is in non repeat for the Pi's connected port.
>
> The Pi key's the RC210 when booting up, which key's the associated units
> connected to the 210, Plus the long hangtime is there 4 seconds..
>
> have no audio,
>
> any Ideas?
>
> Thanks in advance!
>
> JIm n6kmr
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>


-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190120/c8622cf9/attachment.html>