[App_rpt-users] gtx900

[Kirk Just Kirk]

Make SURE you do the power control mod!!!!!! These radios do stupid
things...like 2 watts one time and 18 the next time. They run hot. NOT a
good choice for a Node radio.

On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001 at gmail.com> wrote:

> Hello to the group, Got a pair of GTX900 mobile radio and got them tuned
> (mostly ok) to the ham band.
>
> I now want to use them for repeater use in the 900 mhz band.
>
> I went to repeater builder page and used all the info I could for the
> interfacing.
>
> I did went for flat audio connection, as stated on the gtx900 page I used
> pin 7 and 11 for the receiver audio out. And I did put the dip switch close
> to the interfacing jack to off as specified. I then tried to do a radio
> tune rxnoise but it always fail. I want to use the dsp fonction of usbradio
> as it is way easier then getting a cor output on the gtx900.
>
> Anyone ever used those radio with ASL?
>
> thanks
> VE2PF
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190705/6f655878/attachment.html>