[App_rpt-users] gtx900

[Pierre Martel]

I forgot to say that I am using a URI-X , the one with the cm108 chips. It
is aleast 6 years old.



Le sam. 6 juil. 2019 à 00:20, Pierre Martel <petem001 at gmail.com> a écrit :

> Hello to the group, Got a pair of GTX900 mobile radio and got them tuned
> (mostly ok) to the ham band.
>
> I now want to use them for repeater use in the 900 mhz band.
>
> I went to repeater builder page and used all the info I could for the
> interfacing.
>
> I did went for flat audio connection, as stated on the gtx900 page I used
> pin 7 and 11 for the receiver audio out. And I did put the dip switch close
> to the interfacing jack to off as specified. I then tried to do a radio
> tune rxnoise but it always fail. I want to use the dsp fonction of usbradio
> as it is way easier then getting a cor output on the gtx900.
>
> Anyone ever used those radio with ASL?
>
> thanks
> VE2PF
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190706/181fe2e0/attachment.html>