[App_rpt-users] gtx900

[Kirk Just Kirk]

What are you going to use a a RCVR (902.xxxx) Mhz?


On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001 at gmail.com> wrote:

> Thats in the to do list. But I want to have it interfaced properly before
> doing this. Cause if I cant get those radio running good with allstarlink,
> I wont mess with the rest of the mods..
>
>
>
> Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr at gmail.com> a écrit :
>
>> Make SURE you do the power control mod!!!!!! These radios do stupid
>> things...like 2 watts one time and 18 the next time. They run hot. NOT a
>> good choice for a Node radio.
>>
>> On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001 at gmail.com> wrote:
>>
>>> Hello to the group, Got a pair of GTX900 mobile radio and got them tuned
>>> (mostly ok) to the ham band.
>>>
>>> I now want to use them for repeater use in the 900 mhz band.
>>>
>>> I went to repeater builder page and used all the info I could for the
>>> interfacing.
>>>
>>> I did went for flat audio connection, as stated on the gtx900 page I
>>> used pin 7 and 11 for the receiver audio out. And I did put the dip switch
>>> close to the interfacing jack to off as specified. I then tried to do a
>>> radio tune rxnoise but it always fail. I want to use the dsp fonction of
>>> usbradio as it is way easier then getting a cor output on the gtx900.
>>>
>>> Anyone ever used those radio with ASL?
>>>
>>> thanks
>>> VE2PF
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190706/71b99616/attachment.html>