[App_rpt-users] gtx900

[Pierre Martel]

902.400rx  927.400 tx


Le sam. 6 juil. 2019 à 08:57, Kirk Just Kirk <wb6egr at gmail.com> a écrit :

> What are you going to use a a RCVR (902.xxxx) Mhz?
>
>
> On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001 at gmail.com> wrote:
>
>> Thats in the to do list. But I want to have it interfaced properly before
>> doing this. Cause if I cant get those radio running good with allstarlink,
>> I wont mess with the rest of the mods..
>>
>>
>>
>> Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr at gmail.com> a écrit :
>>
>>> Make SURE you do the power control mod!!!!!! These radios do stupid
>>> things...like 2 watts one time and 18 the next time. They run hot. NOT a
>>> good choice for a Node radio.
>>>
>>> On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001 at gmail.com> wrote:
>>>
>>>> Hello to the group, Got a pair of GTX900 mobile radio and got them
>>>> tuned (mostly ok) to the ham band.
>>>>
>>>> I now want to use them for repeater use in the 900 mhz band.
>>>>
>>>> I went to repeater builder page and used all the info I could for the
>>>> interfacing.
>>>>
>>>> I did went for flat audio connection, as stated on the gtx900 page I
>>>> used pin 7 and 11 for the receiver audio out. And I did put the dip switch
>>>> close to the interfacing jack to off as specified. I then tried to do a
>>>> radio tune rxnoise but it always fail. I want to use the dsp fonction of
>>>> usbradio as it is way easier then getting a cor output on the gtx900.
>>>>
>>>> Anyone ever used those radio with ASL?
>>>>
>>>> thanks
>>>> VE2PF
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190706/34be5da7/attachment.html>