[App_rpt-users] Telemetry /

[Mike]

Jim,
Here are the default telemetry commands.

933 = cop,33			; Local Telemetry Output Enable
934 = cop,34			; Local Telemetry Output Disable
935 = cop,35			; Local Telemetry Output on Demand

936 = cop,36			; Foreign Link Local Output Path Enable
937 = cop,37		; Foreign Link Local Output Path Disable ***
938 = cop,38	; Foreign Link Local Output Path Follows Local Telemetry
939 = cop,39		; Foreign Link Local Output Path on Demand

942 = cop,42			; Echolink announce node # only
943 = cop,43			; Echolink announce node Callsign only
944 = cop,44			; Echolink announce node # & Callsign

Check to see if they have been set in your system and run as desired.

...mike/kb8jnm

On 3/6/2019 12:42 PM, jimmy keffer wrote:
> if have a node connrd to a very large network can i set my node my node
> not to play all connects to network
> thanks jimmy ka3vgm
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>