[App_rpt-users] It still doesn't work???

[nhardman1428 at gmail.com]

What radios are you using. The settings for COS/COR. Logic high/low PTT logic high/low need set before you can “tune” the audio levels.  Which channel driver did you select to use?  

Thank you
Nathan Hardman
Nhardman1428 at gmail.com


> On Mar 24, 2019, at 4:15 PM, Michael Wolthuis <wolthuis at gmail.com> wrote:
> 
> Have you seen / used the ASL Beginners Guide?
> 
> Mike
> Kb8zgl 
> 
> Sent from my iPhone
> 
>> On Mar 24, 2019, at 4:10 PM, Jim Hertel <n6kmr at frontiernet.net> wrote:
>> 
>> Downloaded ASL..
>> 
>> Went through the first time set up... toggled thru the rest of the set ups, entered items as needed, I can winscp in from another computer, and I believe I have the correct UDP ports open on the modem to operate outside of the box.
>> 
>> and I am still struck going now where.. again.  Won't do anything.. this shouldn't be this complicated?
>> 
>> I have node 47379, on a Pi 2, rim-lite to the rc210. (also have a URIxB available but not connected) I found IRLP to easier to work with than this... need help! before i go nutty! this has been a 3 sunday project..
>> 
>> Step by step instructions suck !
>> 
>> Jim N6KMR
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.