[App_rpt-users] Connection fail message

[Tim Sawyer]

First, it was stated earlier in this thread that this is a hamvoip node.
Even though the Hamvoip distro is significantly different than AllStar, and
diverging further with each release, we do our best to support all users.
That said...

This looks like the same issue I found on my hamvoip last night. There was
a # in the registration Username even thought I had the hamvoip
registration commented out.

iax2 show registry
Host                  dnsmgr  Username               Perceived
Refresh  State
74.91.126.182:4569    Y       2534#4568              47.157.250.110:4568
     60  Registered
74.91.126.182:4569    Y       2510#4568              47.157.250.110:4568
     60  Registered

iax.conf:
register = 2534:xxxxx at register.allstarlink.org
register = 2510:xxxxx at register.allstarlink.org
;register=2510#4568:xxxxx at register.hamvoip.org
;register=2534#4568:xxxxxxx at register.hamvoip.org

I had to delete the commented register lines and restart Asterisk to get
AllStar registration to work.

I tried to repeat the problem today and could not. So who knows what
happened. In any case, for AllStar your registration has to look more like
this. You likely have only one node on your server and in that case only
one registration.

iax2 show registry
Host                  dnsmgr  Username               Perceived
Refresh  State
44.98.254.145:4569    Y       2510                   47.157.250.110:4568
     60  Registered
44.98.254.145:4569    Y       2534                   47.157.250.110:4568
     60  Registered

Another thing to keep in mind about hamvoip is that there is no
rpt_extnodes file. It's been replaced with dns. Dns can be queried like so

*CLI> rpt lookup <node number>



On Wed, Mar 27, 2019 at 12:19 PM Bryan Fields <Bryan at bryanfields.net> wrote:

> On 3/27/19 11:55 AM, Joe C wrote:
> > Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
>
> Joe, that's your internal address.  You are behind some sort of NAT that's
> likely mapping that to a public IP address.  We need to get the public IP,
> and
> ensure the UDP port 4569 is forwarded from the outside public address to
> your
> internal address of 192.168.1.14.  If this is not forwarded properly, your
> connections will fail.
>
> So I bet your IP is likely 108.41.61.124, and your register= statement is
> incorrect due to the password errors we're seeing on the registration
> server.
> Please double check this.  Unicast me your iax.conf and I'll take a look
> at it.
>
> 73's
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>


-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190327/eb5771b9/attachment.html>