[App_rpt-users] URIx versus URIb

[Kevin Custer]

Lu,

I was just informed that DMK is offering a free replacement for anyone 
who is unhappy with the audio levels on their URIxB.  To initiate this, 
send an email to sales at dmkeng.com <mailto:sales at dmkeng.com> to receive 
an RMA and they will take care of the situation.

Kevin W3KKC




On 5/10/2019 10:26 PM, Lu V wrote:
> It’s been about 10 or 12 years since I ordered a URI and I just ordered one as I ran out of them and it came as a URIb version.
> I didn’t even notice it until I started investigating while I was having trouble with reaching sufficient discriminator level and pin 21. I’m using Kenwood next edge repeaters and I have several of them. I’m finally getting around in adding a node to my Marathon Florida repeater and discovered the hard way that the URIB will not work properly I called and found out that they change the chipset and it is not as sensitive. Just wanting if anyone else had experienced this and what the resolution might be?
> I tried testing a URIb on a gm300 and found that it just barely had enough level. It actually warns you but it does work.
> There needs to be an alternative or they need to fix this because I can see this being a showstopper for a lot of people.
>
> Lu Vencl
> KA4EPS

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190511/6fdeff23/attachment.html>