[App_rpt-users] AllStarLink to SVXLink Reflector

[Rachid Karroo]

Hi Adi

I would like to connect my allstar node to a Svxreflector network.

At my station, I have a PI connected to a Svxreflector network and a second
PI running allstar node.

I want to interconnect them or at least provide DTMF for Svxreflector to
connect to allstar.

vy 73's
Rachid
3B8FP




On Mon, May 13, 2019 at 12:26 AM Adi Bier <dl1hrc at gmx.de> wrote:

> Hi Rachid,
>
> Am 12.05.19 um 19:59 schrieb Rachid Karroo:
> >
> > PORT=5301 <---- Can be either 5300, or 5301, or 5302
> >
> > Is it possible to change the Echolink Port value 5200 to 5300 thus may
> > be allow connection to SVX reflector using the Echolink module
> > AllStarLink ?
>
> No, since the protocol of tcp-port 5200 (classic EchoLink) is different
> from the Svxreflector's protocol. Please could you figure out your
> intention. SvxLink supports EchoLink and app_rpt as far as I know too,
> you want to connect an allstar node to a SvxReflector network?
>
> vy 73s de Adi / DL1HRC
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190513/512eec1e/attachment.html>