[FSG-public] Programming Anytone for your DMR repeater

[John Besedic]

Do you have any instructions on how to setup Anytone radio to communicate
with your repeaters?

Like Talkgroup numbers, color codes etc?


On Wed, Dec 9, 2020 at 4:24 PM Bryan Fields <bryan at flscg.org> wrote:

> The St Pete site is back online.
>
> The main ex4200 Switch failed at the site and the analog repeater
> controller
> was corroded to heck as well.  The switch has restored IP to the site, and
> the
> NXDN and DMR repeaters are online and should be linked.
>
> The Analog/P25 is online, but p25 and local mode only for now.  I hope to
> have
> the controller fixed soon to bring it back online.
>
> We're out of spare switches and will likely need to requisition a couple
> more
> to have around.  This switch up here had a prior issue where we had a port
> fail in it, and we just marked it as failed and moved the device.  We're
> thinking this should no be taken as an indication that the switch is
> likely to
> fail and should be replaced if we see that ever happen again in the
> network.
>
> 73's
> --
> Bryan Fields, W9CR
> Florida Simulcast Group, Inc.
> _______________________________________________
> FSG-public mailing list
> FSG-public at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/fsg-public
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/fsg-public/attachments/20210204/c3b14c7a/attachment.html>