The names I posted are only a example. use anything you want. On 5/11/2016 1:59 PM, Robert Newberry wrote:
I get it kind of... I'm still a little confused.
I currently have the named section defined as. I use TG 42657 as my ID to access ASL.
[AMBE_PEER] gatewaydmrId = 312307 tgFilter = 42657 txTg = 42657 txTs = 2
I put this right above what was already in the file so the next section is
[BM] tgFilter = 3100, 31094 txTg = 3100 txTx = 2
So am I to assume that in my /opt/dmrlink/ambe_audio/dmrlink.cfg
that I should ass a section for BM with the relevant connection information? currently the only thing enabled is AMBE_PEER.
Will this be an issue since I already have a connection to Brandmeister already defined in /opt/dmrlink/bridge/dmrlink/cfg
Thank you.
On Wed, May 11, 2016 at 12:49 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
It's easy to steer your DMRGateway via DTMF or CLI or AllMon or AndroidIAX. Consider the following snip from ambe_audio.cfg
section = BM # Use BM section values
# order of precedence: dmrlink.cfg, section=, DEFAULTS
[BM] # Listen to all, TX on TG3100 TS1 tgFilter = 3100,3106,31094 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway txTg = 3100 # TG to use for all frames received from DMRGateway -> IPSC txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC
[BM3100] # Brandmeister tgFilter = 3100 # USA Nationwide txTg = 3100 txTs = 1
[BM3106] # Brandmeister tgFilter = 3106 # California Statewide txTg = 3106 txTs = 2
[BM31094] # Brandmeister tgFilter = 31094 # US call area 4 txTg = 31094 txTs = 1
[Sandbox] # Sandbox network tgFilter = 3120 txTg = 3120 txTs = 2
[LOCAL] # Local network tgFilter = 3 txTg = 3 txTs = 2
[Shutup] # Be quiet tgFilter = 0 txTg = 0 txTs = 2
/etc/asterisk/rpt.conf
; DMRGateway Commands
73 = cmd,/bin/bash -c 'echo -n "section=Shutup" | nc 127.0.0.1 31002' 74 = cmd,/bin/bash -c 'echo -n "section=BM" | nc 127.0.0.1 31002' 76 = cmd,/bin/bash -c 'echo -n "section=DMR-MARC" | nc 127.0.0.1 31002' 77 = cmd,/bin/bash -c 'echo -n "section=BM3100" | nc 127.0.0.1 31002' 78 = cmd,/bin/bash -c 'echo -n "section=BM3106" | nc 127.0.0.1 31002' 79 = cmd,/bin/bash -c 'echo -n "section=BM31094" | nc 127.0.0.1 31002'
Issue a *73 from a radio (simplified for example) and ambe_audio will use the section [Shutup] Issue a *77 from a radio (simplified for example) and ambe_audio will use the section [BM3100] Replace radio with CLI or AllMon or AndroidIAX. Add a script to cron ...
Available remote control commands: 'reread_subscribers' 'reread_config' 'txTg' 'txTs' 'section' 'gateway_dmr_id' 'gateway_peer_id' 'restart' 'playbackFromFile' 'tgs' 'dump_template' 'get_info'
See: <https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayDiagram.pdf> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.rtf> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayTechOverview.pdf>
For INAD, 73 Steve N4IRS
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic