I have been using ASL to steer to Area 3 on BM to do some testing with N3FE. We noticed some things. The audio delay starts out at about 1-2 seconds then goes to about 20 seconds. I know a while back Steve mentioned turning back all of the logging, which I did. Sometimes not all audio from analog makes it to DMR. Could this have something to do with maybe slot being busy that the particular ID uses? I think this has already been addressed Cory noted a tail on the DMR side, I've turned all of that off in the rpt.conf, but I believe you mentioned there is a tail being introduced by usrp. The last I doubt there's much that can be done. The quality of audio is quite usable but does sound different than dmr to dmr, with the same person. A non technical description was "squashed". N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com