Steve, What image are you using for the pi? How are you installing DMRlink onto the pi? Thanks, Michael KD5DFB On Tue, Dec 1, 2015 at 9:41 AM, Steve N4IRS <szingman@msgstor.com> wrote:
As of right now, all you need is a Pi and DMRlink. Without DMRlink connecting to your repeater, you are not ready for the next step. If you can get the playback app running on your DMR repeater, you are ready. Later this week, I'll put up DMRGateway for download. You will then need the DV3000. Yes it's receive only for now. I have a early picture, this may help. <https://www.dropbox.com/s/g0ax29qgnka9bca/DMRGateway.pdf> <https://www.dropbox.com/s/g0ax29qgnka9bca/DMRGateway.pdf>
73, Steve N4IRS
On 12/1/2015 9:59 AM, Robert Newberry wrote:
I got an XPR8300 that I'm going to put on dummy loads. I want to start testing with this. So other than the DV3000 that plugs into the RPI2. Is there anything else I need to start experimenting with DMRlink and DMRgateway?
I have working analog nodes on allstar. I also have access to a XPR8400 that I can borrow too.
I think as the project exist it's RX only, eventually it will work both ways right?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086
_______________________________________________ Allstar-Digital mailing listAllstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital