Thank you very much Guy. I have à newer model. When tested with Windows. ( ThumbTest.exe ). You have to specify com port and speed. . I got an answer with com 5 and 460488 but none with com5 and 230244..... Will try with a new head tomorrow or with AMBEserver .... Thanks also Steve for the test on Rpi3... Thanks... Le 4 avr. 2017 9:18 PM, "Guy Vachon VE2VAG" <ve2vag@bell.net> a écrit :
Richard,
I was having the same problem as you, since I own a first generation ThumbDV which runs at 230400 bauds. When I removed the –n argument in the command: *python AMBEtest3.py -n -s /dev/ttyUSB0, *it then worked for me.
So for people with first generation ThumbDV’s, the command *python AMBEtest3.py -s /dev/ttyUSB0 *must be used.
Also, on page 3, Steve says at point 8: DO NOT edit DMRGateway.ini UNLESS your DV is not at /dev/ttyUSB0 If you run a first gen ThumbDV, the baud rate must be changed in it also to 230400.
And for Steve: thank you very much for all the efforts in the software and the documents. I went thru it all, and except for the items mentionned up here, everything went well and I’m ready for the next steps.
Thanks and 73s from Guy VE2VAG
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital