I used an old cm108, speaker and an old cb mic to make a desktop node with RPi. You can make it a pvt node and connect to your ASL node. If you with a ASL node on the RPi a ASL node it makes great portable for traveling. Then use allmon to control both the nodes. If you make a desktop node don't forget a mute or vol button on the speaker. David On Wed, Dec 16, 2015 at 8:05 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Hmm... I didn't think about that. It goes to show there is more than one way to accomplish the task and there is definitely no right or wrong way.
I might have burn dial onto a sd card and check it out. On Dec 16, 2015 9:58 PM, "David KE6UPI" <dshaw@ke6upi.com> wrote:
Nice Michael, You can control DV4mini on you RPi using your desktop running only the DV4Mini control panel. I downloaded DIAL for the RPi. You can setup a node then I install mono-complete. I then downloaded dv_serial.
David
On Wed, Dec 16, 2015 at 7:40 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Robert and group,
I am running this on my RPI and it works great. After raspbian loads, it waits 20 seconds and then runs dv4mini. It also has VNC access already setup.
http://www.a23-wertheim.de/downloads/raspberry-pi/dv4mini/file/14-dv4mini-ra...
Michael KD5DFB
On Wed, Dec 16, 2015 at 2:45 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Robert,
I am running one of my dv4mini on a RPi with no problems. I am traveling this afternoon. I will send the info tonight.
Michael KD5DFB
On Wed, Dec 16, 2015 at 2:31 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Sorry Steve, I'm so used to email list slapping people's Pee-pees for leaving the quotes on that I've made a habit of turning it off. I will try to remember to leave it on. The eventual goal is to run my dv4mini on a pi.
For now I'll do the host file mod on my ubuntu machine since it's only temporary.
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
On Dec 16, 2015 3:28 PM, "Steve Zingman" <szingman@msgstor.com> wrote:
It is, but it's hard to understand what you are talking about since there is no quoted text.
On 12/16/2015 3:25 PM, Robert Newberry wrote:
Well my laptop running ubuntu is a 32 bit machine. I noticed that dv4m.ham.dmr.ch only offers a 64 bit download for 15th December 2015.
I reinstalled the 25th September 2015 and everything works again.
So for the lack of information, I figured it was "encouraged" to read the documentation and work thru the problem myself. Rather than asking someone to solve it for me.
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing listAllstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital