So in an effort to identify and tackle issues one at a time. I went and grabbed my new repeater and brought it home and peered it to my dmrlink. I figured this was easier so I could my base radio to talk to the remote repeater and watch to see what happens locally. I logged into dmrlink and set the logging to debug and console. I can see I have 3 peers. Two being my repeaters and the other I setup for AMBE audio to Allstar. An example of my problem is this. Traffic from Brandmeister keys up both repeaters and I can respond to the call from each repeater and it successfully passes to Brandmeister. The problem is whichever repeater I use it does not get repeated the opposite repeater. Thank you N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com On Aug 19, 2016 8:33 AM, "Robert Newberry" <N1XBM@amsat.org> wrote: Is there anyone here running more than one repeater in their IPSC and using the dv3000 to get analog dmr audio? If so I'dlike to ask you some questions. I've tried editing my configuration files and I am still having issues. I currently have one repeater, with dmrlink and the dv3000 all colocated at one site. I use dmrlink as my master and peer my repeaters to it. I added a second repeater at another site. I've got the repeater peered to and I'm able to use BM and other networks I'm connected too. For some reason I can not get ASL<->DMR to work in any direction from my remote site. Thank you N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com