There seems to be a good deal of interest already, so here's some preliminary stuff to look at: http://www.masterscommunications.com/temp/INADVM/ Most of this information is of/for the REV1 prototype. The prototype does not have any RSSI circuitry, and there are a few silkscreen flaws, but are otherwise perfect. There are about a dozen of these out in beta testing, and all of the comments have been very positive so far. The last two files in the list are of the REV2 production unit. You can see the additional RSSI components in the upper right hand corner of the large REV2 image. You can download the two schematic files in PDF to see the differences between the prototype and the REV2 production model. The shipment of the latest revision 2 boards won't be in for about 10 days or so. However, I do have a few prototype boards available immediately for those who don't care about RSSI. They are available in kit form, or assembled and partially tested. The kit comes with the TCXO and regulator preinstalled, then the board is tested to make sure the regulator and TCXO are functioning. Inquire directly. Kevin - W3KKC On 4/7/2017 9:32 AM, Steve Zingman wrote:
Matthew, As soon as the board layout and schematic are ready to publish they will be put up on the site.
On 4/6/2017 9:54 PM, Matthew Pitts wrote:
Sounds interesting. Will there be more information on it closer to release?
Matthew Pitts N8OHU