1) in /etc/asterisk/modules.conf enable usrp as load => chan_usrp.so 2) in rpt.conf create a stanza like: [1999] rxchannel = usrp/192.168.1.182:34001:32001 duplex = 2 scheduler=scheduler functions = functions-repeater hangtime=0 authlevel = 0 Where the address and ports are configured to your network. 3) in rpt.conf add your node [nodes] 1999 = radio@127.0.0.1:4570/1999,NONE Now chan_usrp is ready to go. On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
Hello Robert, If you find out how to configure the Chan_USRP and asterisk please let me know.
David
On Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM@amsat.org> wrote:
Is the "readme.md" the documentation I should be reading for setting up DMRlink?
I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.
Thank you
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital