Steve, You're right, we don't need the repeater as such; I was mainly pointing out the option for those that might already have it to be able to connect in. Mike, You're "missing" that it's all done digitally; no POTS equipment connection needed. The connection between the Hytera repeater and Asterisk is using a format supported natively by Asterisk/AllStar. I have to manage to download the Pi2 AllStar image and get it on a microSD card this weekend so I can get the bridge that I've been running for the last few years operational again on D-STAR and possibly ready for DMRPlus as well. On November 6, 2015 9:40:41 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
Do we really want to have a repeater to act as a gateway? We can connect to the IPSC network with a Linux application (DMRlink) and extract the AMBE for decoding by the DV3000. From there into USRP and on to Asterisk.
Steve
On 11/06/2015 09:34 PM, Mike Zingman wrote:
Matthew,
My XPR8300 does not have any telephone port (RJ11) for this option.
In addition, I see that even for other models (XPR8XXX) you need the CONNECT PLUS XRI 9100 INTERCONNECT GATEWAY to perform this function.
What am I missing?
Mike
On Fri, Nov 6, 2015 at 8:35 PM, Matthew Pitts <daywalker_blade_2004@yahoo.com <mailto:daywalker_blade_2004@yahoo.com>> wrote:
Steve,
I'm not certain about the Hytera repeaters, but Motorola MotoTRBO repeaters require purchase of a code to be entered in the CPS to enable telephone interconnection, which is sort of what we would be doing. I also know that a ham in Europe was experimenting with connecting a Hytera repeater to Asterisk via the Hytera telephone interconnection port.
Matthew Pitts N8OHU
On November 6, 2015 1:30:42 PM EST, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote: >Matthew, >Can you expand on 2? > >Steve > >On 11/6/2015 7:45 AM, Matthew Pitts wrote: >> All right guys, >> >> Here are some of my thoughts on this: >> >> 1) We will need the DV3000 to get D-STAR AMBE into the system. >> >> 2) We should be able to get DMR audio into it without needing an >external AMBE chip; however, it may require an addition to the repeater >programming software that isn't standard to activate the capabilities. >> >> 3) Wires-X is an unknown at this point, though I suspect we can >accommodate it somehow. >> >> Matthew Pitts >> N8OHU > >_______________________________________________ >Allstar-Digital mailing list >Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org>
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- Sent from my Moto X with K-9 Mail. Please excuse my brevity. _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
------------------------------------------------------------------------
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- Sent from my Moto X with K-9 Mail. Please excuse my brevity.