Yes, that will work fine (and what we do). My development has things broken up so I can debug easier, but the running code should be best on one machine. On Sat, Dec 12, 2015 at 4:25 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Thanks Mike!
I am planning to run everything on 1 RPi. So I am assuming that I would use 127.0.0.1 for the ip addresses??
Michael KD5DFB
On Sat, Dec 12, 2015 at 9:47 AM, Mike Zingman <mike.zingman@gmail.com> wrote:
Michael,
Sorry for the lack of comments in the file (it was taken from my Allstar node).
You should find this diagram useful: https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf
*ambe_audio.cfg:* _gateway ; IP address of DMRGateway application _gateway_port ; UDP port of DMRGateway listener _remote_control_port ; UDP command port (will be used to adjust ambe_audio.py parameters from ASL)
*DMRGateway.ini:* [AMBE_AUDIO] server and port ; UDP address of ambe_audio.py [USRP] server and port ; UDP address of USRP (asterisk server address)
*rpt.conf :*
rxchannel = usrp/XX.XX.XX.XX:YYYY:ZZZZ
Where XX.XX.XX.XX is the UDP address of DMRGateway application
YYYY is the transmit port (USRP ---->>>> DMRGateway)
ZZZZ is the receive port (DMRGateway ------->>>> USRP)
Hope this helps
Mike
On Sat, Dec 12, 2015 at 12:08 AM, Michael Hebert <mhebert1975@gmail.com> wrote:
Mike,
In your rxchannel stanza, is 192.168.1.182:34001:32001 the IP address of your RPi? is 34001 and 32001 the tx and rx ports going to the DV3000 dongle?
Also, I notice when I run help in asterisk, usrp show is there.
Here is what mine shows.
192.168.1.182:34001 txkey no rxkey 0 read 0 write 0
Waiting on DV3000 to show up.
Last, in the rpt.conf is that the minimum or the only statements you need?
Michael KD5DFB
On Fri, Dec 11, 2015 at 12:03 PM, Mike Zingman <mike.zingman@gmail.com> wrote:
1) in /etc/asterisk/modules.conf enable usrp as
load => chan_usrp.so
2) in rpt.conf create a stanza like:
[1999]
rxchannel = usrp/192.168.1.182:34001:32001
duplex = 2
scheduler=scheduler
functions = functions-repeater
hangtime=0
authlevel = 0
Where the address and ports are configured to your network.
3) in rpt.conf add your node
[nodes]
1999 = radio@127.0.0.1:4570/1999,NONE
Now chan_usrp is ready to go.
On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
Hello Robert, If you find out how to configure the Chan_USRP and asterisk please let me know.
David
On Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM@amsat.org> wrote:
Is the "readme.md" the documentation I should be reading for setting up DMRlink?
I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.
Thank you
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital