OK so in my repeater programming I've set it as a peer. I assigned the repeater an IP of 192.168.0.202 with a udp of 50002. I've also set in the programming as the master 192.168.0.203 with a upd of 50001. When I looked at the log it looks like the repeater is getting the keep-alives because I see the IP of the repeater in the log file. Also when I run playback.py I do not get any errors. You've seen whats in my dmrlink.cfg because I sent it to you. On Sat, Dec 26, 2015 at 5:12 PM, Steve Zingman <szingman@msgstor.com> wrote:
What is your master listening on? does dmrlink.py in the playback directory connect correctly?
On 12/26/2015 05:11 PM, Robert Newberry wrote:
OK great, Yes and my master is the RPI2 running DMRlink. Should I maybe not be using 192.168.0.203, and rather point it to 0.0.0.0 or something like that. It still isnt working, with the config I've sent you. So I have issues somewhere else?
On Sat, Dec 26, 2015 at 5:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Everything at the top is OK. All 3 below should point at your master
On 12/26/2015 05:04 PM, Robert Newberry wrote:
AUTH_KEY: A1B2C3 MASTER_IP: 192.168.0.203 <---this is the IP of the RPI, I assume this stays the same? MASTER_PORT: 50001
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing listAllstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital