Robert, Try moving your [NODES] call out for the local DMR node to your LAN IP instead of 127.0.0.1. For example, if your DMR-ASL bridge is on 192.168.0.41, then make the following change (xxxxx is your ASL node): ;xxxxx = radio@127.0.0.1/xxxxx,NONE xxxxx = radio@192.168.0.41:4565/xxxxx,NONE ; RPi DMR Regards, Tom / K5TRA From: Robert Newberry [mailto:N1XBM@amsat.org] Sent: Friday, September 9, 2016 8:02 AM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: [Allstar Digital] dmrgateway and dv3000 problem I am just posting a request for anyone's observations/help on dmrgatewway and the DV3000. I am having two issues, one of them I have been told is a known bug, the second appears to be something I am doing wrong. I may post over on the K0USYlink group to maybe catch people I'm missing. I will briefly explain my setup. Two XPR8400 repeaters. Site one has repeater and DMRlink along with DV3000 all co-located on the same LAN. Second site(repeater) peers to a master setup in DMRlink at site one. Both of these sites fucntion as they should using DMR. Problem is the "remote" site can communicate ASL<->DMR just fine. The site with all of my co-located equipment can only communicate ASL->DMR. DMR->ASL the audio on the analog side is slow and slurred. I posted hopefully all of the files you should need to view. https://drive.google.com/open?id=0B0dGQewXg1uxbFVLS0RSTWJ0QmM You do not need an account to look at them. I am hoping there are other people doing the same or similar thing and we can get together and compare notes. I am doing my best to post config files and trying to share what I am doing so other people can share their experiences too to help the community. -- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>