When I looked a at a XPR8300 Mototrbo repeater on the station monitor, it's right at 3 KHz. Right now the receiver is in wide band. I'll try narrow later today. Steve On 01/17/2016 04:02 PM, Corey Dean wrote:
Wideband? Instead of using my r100, I think I will use a couple of m120's. If nArrow I will try a pair of 1225's.
Sent from my iPhone
On Jan 17, 2016, at 3:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
I had my first QSO using the MMDVM on DMR. Using a pair of Tait 20XX mobile radios and the MMDVM. Current firmware and MMDVMHost software running a Raspberry Pi2. Installed and compiled from the G4KLX repository on github.
73, Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic