Matthew, My XPR8300 does not have any telephone port (RJ11) for this option. In addition, I see that even for other models (XPR8XXX) you need the CONNECT PLUS XRI 9100 INTERCONNECT GATEWAY to perform this function. What am I missing? Mike On Fri, Nov 6, 2015 at 8:35 PM, Matthew Pitts < daywalker_blade_2004@yahoo.com> wrote:
Steve,
I'm not certain about the Hytera repeaters, but Motorola MotoTRBO repeaters require purchase of a code to be entered in the CPS to enable telephone interconnection, which is sort of what we would be doing. I also know that a ham in Europe was experimenting with connecting a Hytera repeater to Asterisk via the Hytera telephone interconnection port.
Matthew Pitts N8OHU
On November 6, 2015 1:30:42 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
Matthew, Can you expand on 2?
Steve
All right guys,
Here are some of my thoughts on this:
1) We will need the DV3000 to get D-STAR AMBE into the system.
2) We should be able to get DMR audio into it without needing an external AMBE chip; however, it may require an addition to the repeater
On 11/6/2015 7:45 AM, Matthew Pitts wrote: programming software that isn't standard to activate the capabilities.
3) Wires-X is an unknown at this point, though I suspect we can
accommodate it somehow.
Matthew Pitts N8OHU
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- Sent from my Moto X with K-9 Mail. Please excuse my brevity. _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital